Piston cylinder filling machine for thick and half thick fluids

Behafarin Machinery Company is manufacturer of Piston cylinder filling machine for thick and half thick liquids.

The piston cylinder filling system is linear and rotary. The amount of fluid volume is defined by the amount of intake of the cylinder in the piston. The method of moving cylinder arms is controlled by the gear to the gearbox or wing screw to the servo motor. This machine can be designed from one cylinder to ten cylinders at the customer’s request and according to the required capacity and efficiency. Usually, the piston cylinder system is used to fill the thick and half-thick fluids; of course, if the liquid is not frothing, the piston cylinder can also be used while filling. The volume of the pistons of this device is designed and built according to the volume of the container. For improved performance, the cylinders should be

completely polished with magnetism. Using suitable packing according to fluid types helps greatly to the accuracy and durability of the cylinder and piston.

Technical Specifications of This Machine

Chassis made of iron cans or steel
Coated steel cover 304
100 to 300 liter steel tank 304
With a three-meter steel conveyor with an inverter to adjust the engine speed
Rig and pneumatic nozzles
Electrical panel made of steel or iron and furnace coated with PLC
Cylinder suction system, gearbox or servo motor
The piston cylinder filling machine is suitable for high viscosity liquids. In a simple definition liquids that are resistant to leakage and viscosity. Materials such as mayonnaise, grease, industrial and edible oils, honey, jam, salt, wax, cream, types of pasty materials and thick chemical oils are examples of highly viscous liquids. For packaging them it is necessary to use cylindrical liquid filler. Filling these liquids is really sensitivity because the amount of wrong settings or even wrong design in the filling mechanism causes unacceptable errors.
Tips on volumetric mass and density of silts
Volumetric mass density or density is mass per unit volume and here it is shown by P. Its standard unit in physics and engineering sciences is kg / m3 and in chemistry gr / cm3.
English name: mass density or abbreviation density
P=m/v


The specific weight is the weight per unit volume of a material. The symbol of specific weight is γ (the Greek letter Gamma) and its unit is N / m3.

English name: Specific Weight
Specific gravity =pg=W/V